Working with electricity requires a strict focus on safety, as even minor errors can lead to severe injuries or damage. At DWUTAH / Ogden Electrical, we follow essential safety protocols to ensure our work is as safe and effective as possible. Here are some key safety procedures we always adhere to:
1. Power Off and Lockout/Tagout (LOTO) ProceduresBefore starting any work on an electrical system, we always turn off the power at the main breaker panel. This step prevents accidental electrocution and ensures the system is de-energized. Using a Lockout/Tagout (LOTO) procedure, we lock the breaker and place a tag on it to inform others that work is being conducted, ensuring no one accidentally turns the power back on.
2. Use of Personal Protective Equipment (PPE)Appropriate PPE is essential for electrical safety. We always wear insulated gloves, safety glasses, and protective footwear to minimize risk. Depending on the job’s complexity, additional gear like flame-resistant clothing, hearing protection, or a face shield may also be used.
3. Verify Power is Off with Testing EquipmentEven after turning off the power, we double-check that the circuit is de-energized by using a non-contact voltage tester or multimeter. This step confirms that no residual power remains in the system before we begin working.
4. Follow National Electrical Code (NEC) GuidelinesWe adhere to the NEC guidelines to ensure our work meets industry standards for safety. These guidelines outline specific requirements for installation, grounding, circuit protection, and more, minimizing potential risks and ensuring compliance with regulatory standards.
5. Work with Insulated ToolsUsing insulated tools is crucial for protection, especially when working in areas where accidental contact with live parts may occur. Insulated tools provide an extra layer of protection against shock and reduce the risk of short circuits.
6. Use Proper Ladders and EquipmentFor jobs that require height, we use non-conductive fiberglass ladders instead of metal ones. Metal ladders can conduct electricity, increasing the risk of shock. Using the right equipment for each task is essential for a safe working environment.
7. Avoid Wet ConditionsWater and electricity are a dangerous combination. We ensure the work area is dry, and we avoid working with electrical components in wet conditions. If outdoor work is necessary, we postpone it during rain or other wet weather, or take precautions to ensure the workspace is completely dry.
8. Ensure Proper GroundingProper grounding is crucial to prevent electrical shocks. We verify that the system is correctly grounded and that all circuits, outlets, and equipment meet grounding standards. Grounding creates a safe path for excess electricity, reducing the risk of shock and equipment damage.
9. Maintain Clear CommunicationIf working with a team, we maintain clear communication to ensure everyone is aware of procedures, equipment status, and any potential hazards. Proper communication helps prevent accidents and ensures the entire team is aligned with safety practices.
10. Stay Up-to-Date with TrainingElectrical safety procedures and codes can change. We stay current with the latest safety training and certifications to ensure that every job we undertake follows the most recent guidelines. Regular training sessions keep our team updated on best practices and emerging technologies.

By following these safety procedures, we protect ourselves, our clients, and their property. For any electrical work, especially complex or high-risk tasks, remember that professional assistance is the safest option. At DWUTAH / Ogden Electrical, safety is our top priority, and we’re committed to providing reliable and secure services for every project.




4o

Electrical issues in the home can be frustrating and potentially dangerous if not handled properly. Knowing how to troubleshoot common problems safely and effectively is valuable knowledge for any homeowner. Here are some typical electrical issues you might encounter, along with tips on how to troubleshoot them. Remember, if an issue seems beyond your expertise or you’re unsure, it’s always best to call a professional like DWUTAH / Ogden Electrical for assistance.
1. Tripped Circuit BreakerOne of the most common electrical problems homeowners face is a tripped circuit breaker, often caused by an overload when too many appliances are used at once.
Troubleshooting Steps:

• Check the Circuit Breaker Panel: Open your breaker panel and look for a switch that’s moved to the “off” or halfway position.
• Reset the Breaker: Flip the tripped breaker fully to “off” and then back to “on.”
• Identify the Cause: If the breaker trips again, you may have an overload, faulty appliance, or wiring issue. Unplug devices in that circuit, and plug them in one at a time to identify any culprit.

2. Flickering or Dimming LightsFlickering or dimming lights can be a sign of several issues, from a loose bulb to more serious wiring problems.
Troubleshooting Steps:

• Check the Bulbs: First, ensure that all bulbs are tightly screwed in and not near the end of their lifespan.
• Inspect Light Fixtures: Flickering could be due to a poor connection within the fixture. Turn off the power, remove the fixture, and check for loose wires.
• Evaluate Other Causes: If multiple lights flicker, it might indicate a larger problem in the electrical panel or even the power supply. Contact an electrician if the issue persists.

3. Frequent Bulb BurnoutsIf you notice that bulbs burn out more quickly than expected, there might be an underlying problem with your electrical system.
Troubleshooting Steps:

• Check Wattage: Make sure you’re using bulbs with the correct wattage for your fixtures.
• Inspect the Fixture: A loose or improperly installed fixture can cause bulbs to burn out faster. Tighten connections and ensure the fixture is secure.
• Look for Power Surges: If the problem is widespread, it could be due to voltage fluctuations. An electrician can test your voltage levels and recommend surge protection if needed.

4. Dead OutletsFinding an outlet that doesn’t work can be inconvenient. This could be due to a tripped GFCI outlet, a tripped breaker, or even a wiring issue.
Troubleshooting Steps:

• Check for a Tripped GFCI Outlet: Ground Fault Circuit Interrupter (GFCI) outlets are often found in kitchens, bathrooms, and outdoor areas. If it’s tripped, reset it by pressing the “reset” button.
• Inspect the Breaker Panel: Look for any tripped breakers related to the outlet’s circuit and reset them as needed.
• Test the Outlet: If the outlet remains dead, it might be due to faulty wiring or a loose connection behind the wall. This issue may require a licensed electrician to safely repair.

5. High Electric BillsUnexplained increases in your electric bill can indicate an electrical issue, from an inefficient appliance to a wiring problem.
Troubleshooting Steps:

• Check for Energy Hogs: Look for older appliances, heaters, or air conditioners that might be consuming excess energy. Consider upgrading to energy-efficient models.
• Inspect Wiring for Damage: Damaged wiring can cause higher electricity usage. If you suspect faulty wiring, call a professional to inspect and repair it.
• Unplug Unused Devices: Leaving devices plugged in, even when not in use, can draw power. Make it a habit to unplug unused electronics or invest in smart power strips.

6. Light Switches Not Working ProperlySometimes light switches can feel loose, fail to turn on a light, or even make crackling sounds. This can be a sign of wear and tear or a wiring issue.
Troubleshooting Steps:

• Tighten Loose Switches: Turn off the power, remove the switch plate, and check for loose wiring connections.
• Replace the Switch: If the switch is old or damaged, it may need to be replaced. If you’re comfortable with basic wiring, you can attempt this yourself, but call a professional if you’re unsure.
• Address Crackling Sounds Immediately: Crackling or popping sounds from a switch can indicate an electrical hazard. Stop using the switch and contact an electrician for inspection.

Know When to Call a ProfessionalWhile basic troubleshooting can resolve some electrical issues, it’s essential to know your limits. Electrical systems can be dangerous if mishandled, so if you’re uncertain or the problem persists, it’s best to reach out to DWUTAH / Ogden Electrical. Our team of licensed electricians can safely diagnose and repair electrical issues to keep your home safe and functional.

Need Help with Your Electrical Problems? Contact DWUTAH / Ogden Electrical Today!
We’re here to ensure that your home’s electrical system is safe, efficient, and reliable. For expert troubleshooting and repair, give us a call.

When it comes to safeguarding your home’s electrical system, fuses and circuit breakers are essential components. Both protect against electrical overloads that could lead to damage or even fires, but they operate in slightly different ways. At DWUTAH and Ogden Electrical, we want homeowners to have a clear understanding of these protective devices, how they function, and when they might need to be replaced or upgraded.
What is a Fuse?A fuse is a simple yet effective device that interrupts the flow of electricity if an overload occurs. Inside each fuse is a small strip of metal that melts when the electrical current exceeds a safe level. When this happens, the circuit is broken, preventing excess current from damaging the wiring or appliances in your home. However, because the metal strip physically melts, a blown fuse must be replaced with a new one each time an overload occurs.
Pros of Fuses:

• Fast Response: Fuses typically respond quicker than circuit breakers to overloads, offering fast protection.
• Cost-Effective: Fuses are inexpensive and straightforward to replace.
• Easy to Install: Fuses are compact, making them ideal for certain applications and easy installation in smaller spaces.

Cons of Fuses:

• Single-Use Only: Once a fuse blows, it must be replaced. This can be inconvenient if the fuse box is difficult to access.
• Not Ideal for Modern Electrical Demands: Fuses are generally used in older homes, as they may not be suitable for the higher electrical demands of today’s appliances.

What is a Circuit Breaker?A circuit breaker, unlike a fuse, is a reusable switch that automatically interrupts the flow of electricity when an overload or short circuit is detected. Instead of melting like a fuse, the breaker “trips,” breaking the circuit and stopping the flow of electricity. Once the issue has been addressed, the circuit breaker can simply be reset, making it a convenient and long-lasting solution for many homes and businesses.
Pros of Circuit Breakers:

• Reusable: Circuit breakers can be reset after tripping, which makes them more convenient than fuses.
• Better for High-Demand Systems: Modern homes with high energy demands benefit from the durability and reliability of circuit breakers.
• Quick Reset: After tripping, circuit breakers can easily be reset by flipping a switch, saving time and hassle compared to replacing a fuse.

Cons of Circuit Breakers:

• Higher Cost: Circuit breakers are generally more expensive to install initially than fuses.
• Slightly Slower Response: Circuit breakers may not respond as quickly as fuses to some types of electrical faults, although the difference is minimal for household needs.

Key Differences Between Fuses and Circuit Breakers

1. Operation: Fuses use a one-time metal strip that melts to interrupt the flow of electricity, whereas circuit breakers use an internal switch that can be reset.
2. Reusability: Circuit breakers can be reset and reused, making them more convenient for modern homes, while fuses need to be replaced after each overload.
3. Response Time: Fuses often respond faster than circuit breakers, which can make them ideal for very sensitive equipment, but circuit breakers are usually more practical for household use.
4. Suitability for High-Demand Systems: Circuit breakers are typically better suited for handling the electrical loads of modern homes.

Which Should You Choose?While both fuses and circuit breakers are effective at protecting against electrical overloads, circuit breakers have become the standard in most modern electrical systems. They are easier to manage, reusable, and well-suited for homes with high power demands. Fuses, however, still serve a purpose in specific situations and may still be used in some older homes and appliances.
If you’re unsure about whether your home is best served by fuses or circuit breakers, or if you’re considering an electrical upgrade, DWUTAH and Ogden Electrical are here to help. Our team of licensed electricians can assess your current system, provide expert recommendations, and ensure that your home’s electrical system is safe, up-to-date, and ready to handle your needs.

Need Assistance with Your Electrical System? Contact DWUTAH / Ogden Electrical Today!
Whether you’re considering an upgrade or simply have questions, our team is here to ensure your home remains safe and efficient.